Currently viewing the tag: "bmw"

BMW M5/M6 2005>2011

Designation E60-E64 S85B50 V10

Standard Output: 500hp | 383tq

Power Gains

HEX Tuned: +20-30hp | +15-25tq

HEX TUNING ECU Performance Software
HEX Tuned: $895

Available now from VF dealers worldwide. | 714.528.0066 ext. 405

BMW M5/M6 2005>2011

Upgraded ECU software for the BMW M5/M6 is programmed through the OBD2 diagnostic port resulting in a noticeable increase in throttle response and power. Various enhancements include Vanos and turbo efficiency re-calibration.

This calibration was scientifically tested and measured on a Mustang MD500-AWD chassis dyno using 91 octane. The top speed limiter was removed on certain models and combined with refined ignition, fuel and camshaft calibration.

Factory torque management has increased in complexity compared to prior generations of BMW software. Hex Tuning engineers understanding of the true design parameters and function rules allow them to measure the smoothness and transitioning of power (drivers torque request).  This stage 1 software upgrade is considered a conservative upgrade and a precursor to greater levels of power to come. Software stages are eligible for a credit towards the next stage of power when available.

The software is a reversible electronic flash and does not use any hardware devices. Worldwide model M5 and M6s are applicable.

This product is not compliant with the California Air Resource Board and not for use on public roads in California.This applies to any aftermarket product that does not display a CARB EO#. Power ratings are subject to conditions and dynomometer model used.

Tagged with:

M3 oil cooler

The VF-Engineering E9x M3 Oil cooler  is the latest solution available for the s65 engine oil system. Production manufactured by CSF for VF and utilizing the latest in technology, the VF oil cooler contains densely packed bars and plates to provide the greatest surface area for heat exchange. Complimented as well with 2 extra rows of cooling, the advantages over the factory oil cooler are more than what meets the eye when put side-to-side by your current factory cooler.

Precise, factory fitment allows for easy 1-for-1 installation. No modifications are required. **Note: BMW superseded the 2 oil lines on E9x M3s built around and prior to 03/08 and oil coolers require the use of the current spec BMW oil lines.

The VF M3 oil cooler is also compatible with all surrounding modifications in which the factory cooler is applicable. Whether you already have a supercharger or you are simply looking to add reliability with vastly improved oil cooling to your factory-spec M3, this oil cooler will help keep your oil temps in check in arduous conditions on the track or sitting in traffic.

Retail $895VF oil cooler

M3 oil cooler

E9x M3 oil coolerVF oil coolerM3 oil cooler

Welcome to VF-Engineering Superchargers. We design and manufacture superchargers for Audi, BMW, Porsche, Lamborghini and Spyker models. We are proud to be Made in California. All supercharger systems are made using the latest manufacturing methods for simplicity and functionality. For more information, choose your model from our menu and feel free to call us on 714-528-0066.

M3 Superchargers available for all M3 models from 1995 to 2013.

R8 Superchargers available for both the V8 and V10.

911 Superchargers available for all 911 models from 1997 to 2008.

S4 Superchargers available for the 4.2 liter motor from 2004 to 2008

BMW Superchargers available for the M50, M52, M52TU, S50, S52, M54, M62 and M62TU.

VF-Engineering M3 Superchargers have been in production for over 10 years! Our M3 superchargers are manufactured from the highest quality materials available.

M3 ECU Tuning is developed in house and installed by the user using our Hex Tuning programming cable. M3 Superchargers are a craze that will continue to grip the hardcore enthusiasts looking to take their cars to the next power level with the least amount of effort.

If you want to bump your power to get more out of your M3, call VF-Engineering on 714-528-0066 or click on the above menu to browse through the different model year M3 Superchargers.

Tagged with:

VF Newsletter

Click to the right to join today

Shop NOW!

The new web store is live now. Click on through to learn more about our VF Engineering Supercharger Systems and HEX Tuning Software applications, with images, dyno plots, videos, and much more.

VF Engineering est. 2000


All Products on this website are NOT compliant with the California Air Resource Board (CARB) and Environmental Protection Agency (EPA) and not for use on public roads. This applies to any aftermarket product that does not display a CARB EO#. Power ratings are subject to conditions and dynamometer model used.

Contact Us

We are happy to assist with any inquiries. Give us a call or send a quick email today!

1365 N. Dynamic St. Suite E
Anaheim, CA 92806

tel.: (+1) 714-528-0066
fax: (+1) 714-528-0067
sales @
technical @