Tuned E46 M3: VF Cold-air Intake | Hex Flash ecu tune

June 26, 2014

Tuned E46 M3: VF Cold-air Intake | Hex Flash ecu tune

ECU software for the BMW M3 was enhanced by Hex Tuning and VF engineers resulting in a noticeable increase in throttle response and power. Various enhancements included comprehensive Vanos re-calibration for aggressive intake and exhaust camshaft timing and effective cylinder filling.

This calibration was scientifically developed/tested and measured on a Mustang MD500-AWD chassis dyno using 91 octane. The top speed limiter was removed and combined with refined ignition, fuel and camshaft calibration.

A MAF-less configuration is used to refine the throttle response in all environments and reduce power controls by the overly conservative factory calibration. This software is well suited with MAF-less cold air intakes such as the VF-Engineering cold air intake system for the M3. Peak gains of 35whp and 25wtq have been measured when used in combination with the VF intake and performance exhaust.

Worldwide models of the M3 are applicable and the software is user programmable with the use of the Hex Flash programming cable included. The Hex Flash cable works in conjunction with a laptop and is used to read and write software from/to the vehicles computer (ECU). This allows the user to revert to original programming anytime they wish.

Hex Tuning software features:

  • Vanos mapping enhancements
  • Ignition timing optimization
  • Fuel management re-calibration
  • Enhanced throttle response
  • RPM Shift light feature switched on for 6spd Man
  • Dyno limiter removed
  • Top speed limiter removed
  • MAF-Less calibration
  • Optional increased RPM limiter
  • Optional EU exhaust calibration for US models
  • Optional race gas mapping / custom tuning
  • User programmable Hex Tuning cable included

 

Click here to pricing and more info

 

 

Gain +30hp and +17tq at the wheels in less than 30 minutes. (36hp and 21tq crank)





Also in Blog

How to add 200hp to your Audi R8 V10 and Lamborghini Huracan
How to add 200hp to your Audi R8 V10 and Lamborghini Huracan

July 01, 2020

Ever since the 5.2L V10 was introduced in 2009 by the Volkswagen Group, we have been providing the highest quality supercharger systems for enthusiasts looking to elevate their car’s performance. Therefore, we are recognized as the pioneer of Audi and Lamborghini V10 Supercharger Systems. 5.2L V10 owners with the Lamborghini Gallardo, Huracan (LP580-2, LP610-4, Performante, and EVO) and the Audi R8 V10 (Gen1 and Gen2) come to us for their performance needs.

In this article, we will be addressing the 5 most frequently asked questions about our supercharger system.  

View full article →

First to Market Performante Supercharger
First to Market Performante Supercharger

February 23, 2018

2018+ Huracan Performante is Supercharged

The Lamborghini Huracan Performante was released last year with great excitement and demand.  The Lamborghini engineers out did themselves with an active aero system, improved suspension, and more horse power. This gave us a platform to develop a reliable 900hp supercharger system to take advantage of the Performante improved fueling [...]

View full article →

MotorTrend Tested! VF-800 Huracan Performs for the Press at California Speedway
MotorTrend Tested! VF-800 Huracan Performs for the Press at California Speedway

December 19, 2015


Once a week we get a call from someone who has a 1600 hp Lamborghini Huracan. Of course, it can’t be driven or tested but hey….an imaginary 1600 hp is awesome.
VF-Engineering is the first outfit that not only built a real, live high-output Huracan but they also had the balls to [...]

View full article →

Disclaimer

Dealer/Consumer has educated and researched the pros and cons or modifying their vehicle with high performance parts such as superchargers. Customer understands that modifying their car bares certain risks including engine failure and both parties understand and agree to hold VF Engineering harmless of liability from installation and use of this product.

This product is not California Emissions Compliant or CARB approved. It is therefore NOT legal for use on public roads in the State of California or other states with similar laws. It is understood that you are installing this product / having specific labor performed on a pollution controlled vehicle. The dealer/consumer is not absolved of responsibility by means of ignorance and is hereby informed. By installing this product on your vehicle you assume all responsibility and consequences.

Supercharger Systems are considered special order, and not returnable without written consent by VF Engineering. Dealer is responsible for providing product disclosures/terms and conditions to their consumers.

Post installation of this product may require trouble shooting/diagnostics. Components and sensors near the limit of their wear tolerance may need replacement. VF-Engineering is not responsible for trouble shooting, diagnostic costs or consequential cost. The purchaser/reseller assumes the risks of modifying a used vehicle and educating themselves on the common traits of their platform. It is the reseller’s responsibility to educate the end user of these terms and conditions.

** Not CARB approved. Not legal for street use in State of California. For OFF-ROAD use only **